Injection Rate:68-95.8 g/s
After-sales Service Provided:Engineers available to service machinery overseas
space between tie-bar:365*360 mm
max. mold height:360 mm
min. mold height:120 mm
Screw type:PP, PE, PS, PC, PPR, PET, PVC, ABS etc.
1) T-slot platen design.
2) ceramic heating ring.
3) air valve (according to customer need).
4) core valves (according to customer need)
5)We can send engineer to your factory for machine commissioning and training staff.
Companies are always pay attention to reduce the set-up time and machine downtime.designed Magnetic clamping system for 50Ton, 80Ton, 110Ton, 140Ton, 180Ton injection machine quick mold change. It clamps the mold with powerful magnet force, the single magnetic platen is very thin which are below 35mm thickness.
The Magnetic mold clamp system for injection moulding machine is one set of two plates for movable platen and fixed platen sides , one main control cabinet and one remote controller ( touch panel are optional )
Magnetic clamping system for injection moulding machine supply is used for only a few moments for the activation and deactivation of the chuck. The piece remains clamped by the force generated by the high energy permanent magnets, insensitive to any possible power outages.
Equipped with Magnetic clamping system, injection moulding machine can greatly increase its mould change efficiency. The operation can be fulfilled with 3 minutes and time for large mould change can be reduced from 2 hours to 10 minutes.
Strong clamping force and total safety
Electricity is only consumed during the mould change. During injection, it is the magnetic force from permanent magnetic materials to clamping moulds, avoiding moulds’ fall off when cable broken or power failure. Safety device like distance detection, temperature detection and location detection are added into the control system. Make sure the safe operation of whole system. Its magnetic force can reach 16kg/cm² and will not decrease as time goes.
Durable and space saving
No platen and pneumatic, hydraulic parts is used in Magnetic mold clamp system and spaces is saved. Magnetic force is spread evenly during the contact surface of mould and magnetic chuck. Depth of magnetic penetration is 16mm and remains stable. There are no wearing parts within and whole system is durable.
Clear instructions on control panel and operation is simple and easy. Installation and operation key points can be acquired by any unprofessional personnel quickly. Mold change can be achieved safely and efficiently, greatly decreased the labor cost and intensity.
Energy saving and environmental friendly
The energy cost for whole system is extremely low and operation and maintenance cost is nearly none. No leakage at all and whole system is safe and environmentally friendly.
1.Trade manager is 24 hours online for your service.
2.Our technical department can make specific designs to meet various kind of customers’ requirements for magnetic lifting and clamping operation.
3.OEM service is available.
4. We will go back to you in 12 hours.
5. Any problem in installation and operation, we will reply in 24 hours.
6. If the product can not meet your requirement or any problem in quality, the product can be changed or returned if it is necessary
7. We provide global quality insurance for all of our product, it issued by world top 500 company.